< Back to Home
  • 07/07/2022 - Map & Measure
    Structure Silos
    LiDAR Structural Scanning Surface

    Planning on expanding existing structures, reroute conduits and piping? Have the facility scanned to better plan and prepare for a quick project, silos were scanned at this facility from the ground level and the upper level to ensure proper planning.

  • Clearance Checks Examples
    07/07/2022 - Map & Measure
    Clearance Checks Examples
    LiDAR Structural Scanning Surface

    Bringing in new equipment or moving a large piece through a facility. We can help with clearance checks by scanning the structures in the surrounding areas. Data can later be used for additional checks and reference for other projects.

  • Forge/Factory Example
    07/07/2022 - Map & Measure
    Forge/Factory Example
    LiDAR Structural Scanning

    No time to stop production, no problem. Data can be captured as production is happening is most situations, dynamic LiDAR speeds up the data capture process immensely.

  • Underground Crane Example
    07/07/2022 - Map & Measure
    Underground Crane Example
    LiDAR Structural Scanning Underground

    Planning upgrades for underground but need to be sending information to contractors on placement of equipment or measurements? Digital twins allow you take measurements in software and avoid the cage ride to check on a measurement.

  • Hoist House Example
    07/07/2022 - Map & Measure
    Hoist House Example
    LiDAR Structural Scanning

    Documenting the locations of equipment and the placement of new equipment can make projects faster and more efficient when it is checked and planned digitally.

  • Headframe Structural Example
    07/07/2022 - Map & Measure
    Headframe Structural Example
    LiDAR Mineshaft Structural Scanning

    If a structure is being rehabbed or being upgraded and there is limited access on a daily basis. Scanning the structure can be valuable for contractors to check measurements without going to site or stopping production.

  • Mill Building Example
    07/07/2022 - Map & Measure
    Mill Building Example
    LiDAR Structural Scanning

    Scanning large structures that have been in place for years with little to no documentation is ideal to digitally see and take measurements.

  • 07/07/2022 - Map & Measure
    Large Pillars and Change Detection
    Change Detection LiDAR Room and Pillar Underground

    Large underground mines with high roofs or backs can be challenging to check for changes or movement. The LiDAR systems used by Wingfield can scan to a range of 600 meters underground and provide real data that can be compared overtime to track movement.

  • 07/07/2022 - Map & Measure
    Shaft Scanning with Timber Sets
    LiDAR Mineshaft Underground

    Point cloud data captured in one hour on a two-compartment 2,000ft timber lined shaft. Data is used for rehabbing, documentation, change detection, and scoping purposes for other contractors.

  • 07/07/2022 - Map & Measure
    Underground Maintenance Shop Example
    LiDAR Structural Scanning Underground

    A processed and scanned underground maintenance shop that was being measured for dimensions and clearance checks for new and existing equipment.